Mold Solutions in Kent

Mold removal and remediation services in Kent not only get rid of mold growing in your home, but also ensure it cannot come back and take hold again. Mold can strike anywhere, even in Kent. Don’t let it sneak up on you in your existing home or cause damage during the construction of a new house.

Call 425-888-3332 to Schedule an Appointment

Table of Contents
  1. Mold Solutions in Kent
  2. Mold Remediation in Kent
    1. Step 1: Inspection
    2. Step 2: Preventing Growth
    3. Step 3: Mold Solution Products
    4. Step 4: Cleaning
    5. Step 5: Prevention
    6. Step 6: Last Appraisal
  3. Preventative Measures in Kent
  4. Finding the Mold in Kent
  5. A Comprehensive Approach to Mold for Kent Residents

Mold Solutions NW understands the particular challenges of preventing mold in Kent. With expertise and know-how, we stomp out mold growth and prevent regrowth. We live and work in the northwest, too, and ensure the products we use don’t pose any threat to the health of the environment here. mold inspections Kent WA Among the products we use to address mold issues is the resurfacing agent Microbe Guard, which creates a new, permanent layer over a surface. By resisting microbial assaults, the new surface can seal out mold, giving it no chance to grow. We are a full service mold solutions provider. Mold is more than a surface problem – we look deeper and use methods focused on long-term prevention. This may be particularly important for those who are protecting a home while it is still under construction. Our experts in Kent have an extraordinary safety record and use affordable and environmentally friendly products. They can rid any building of mold and back it up with a warranty as part of some bids for remediation. Expertise and experience can offer you the security of knowing your mold issues will never return.

Call 425-888-3332 to Schedule an Appointment

The core of our approach involves three key areas: remediation, prevention and inspection. All three of these aspects work in tandem to protect against mold and root it out wherever it may be hiding. We don’t want to just get rid of mold, but offer the security of knowing it can’t return. Inspection can detect the hidden corners where mold likes to grow. By rooting out these locations, it is possible to take preventative measures against future growth. But prevention can also be part of a remediation process. Preventative measures may come up in the middle of a remediation depending on your circumstances. Mold Solutions Kent WA

Mold Remediation in Kent 98031

Call 425-888-3332 to Schedule an Appointment

Mold remediation isn’t just for residential homes. Mold can make people sick and damage the walls, floors and foundations of just about any structure, including a hospital, school or office. It can be easy to miss it when mold strikes, though. It can hide in unlikely and rarely used locations, going undetected for months or years. When it goes undetected, mold gets a chance to spread throughout a building, potentially causing illnesses and damage. Once you know or suspect you have a mold problem, though, remediation can clean up the issue. We’ll find mold wherever it’s growing and destroy it at its source. Our goal is 100% mold removal and prevention. Our comprehensive approach ensures we achieve this. Mold abatement Kent WA

Step 1: Inspection in 98031

First, we conduct an inspection of the affected structure to detect all traces of where mold is growing. Extra moisture can encourage mold to grow, while foundation cracking and leaks show where it’s already growing. Learn more about the specifics of how inspection assists in our overall process below.

Step 2: Containment

If the inspector finds anything concerning, the mold remediation process will begin with containing the area affected by mold. Air scrubbers and plastic sheeting help keep the area where mold is discovered sealed off and safe. Our remediation process also keeps in mind possible contamination of other areas of the structure. Even the tiny particles we can’t necessarily see are accounted for so they can’t escape into the air and find a new place to take root.

Step 3: Mold Solution Products

Now the mold is eliminated. In the process of addressing mold growth, Mold Solutions NW uses a variety of specialized products. One product we use is MMR, a commercial grade tool that gets deep beneath the outer layer to destroy mold. We also try to remove any stains that mold may have caused. Mold that takes hold in surfaces like wood sometimes causes permanent stains even after remediation. At Mold Solutions NW we understand that getting rid of such stains is also important to our customers; MMR can get underneath surfaces to help with this aspect as well.

Step 4: Cleaning

In the mold remediation process, certain items will have to be discarded if they cannot be cleaned. Things such as insulation, cabinetry and drywall are frequently too damaged to remain. That’s all part of the cleanup process, which also includes vacuuming and sweeping up any dirt or minor particles overlooked in the remediation process. We use a HEPA vacuum while cleaning to make sure that invisible particles don’t escape into the air. This is also part of our containment plan. We want to make doubly sure that mold doesn’t find a way out of the contained work area and into a different part of the building.

Step 5: Prevention

We don’t want to just get rid of the mold you see now, but also make sure you don’t find any new growth. We treat affected areas with an EPA-registered, safe product that destroys microbes trying to grow in your home. You will have no reason to worry about chemical irritants, either, as the anti-microbial we use is non-toxic, water-based and has no VOC emissions. We go into more detail about our prevention strategies below. We will make sure mold has no chance to return after we eliminate it from your home, office or other building.

Step 6: A Last Look

Finally, we make a thorough inspection of our work to ensure we didn’t miss a single spore. We check to make sure we removed all mold and contaminated items, and that we cleaned up the area where we worked. We offer a 10-year warranty so you can feel secure in this inspection. While the initial inspection is for finding the root of the problem, the final inspection helps us locate anything that could be an issue in the future and validate the integrity of our remediation work. Our confidence in this process stems from our inspectors’ expertise. They use their knowledge to carefully and meticulously inspect any place where mold might hide. Mold removal Kent WA

Stopping Growth in Kent 98031

Call 425-888-3332 to Schedule an Appointment

As mentioned above, it isn’t enough just to remove mold. We also want to make sure to prevent it ever coming back. A tenant of our approach is future mold prevention. We understand how important prevention is for Kent and the Pacific Northwest in particular. In this wet climate, mold prevention is an ongoing effort that is important for all buildings and homes. Therefore, prevention is a serious concern in this area. One of the most common situations calling for mold prevention is new construction. Wet weather has ample opportunity to compromise a home while it is exposed in the normal course of the building process. The constant moisture in the air and ground around the Pacific Northwest can promote mold growth. For these reasons, prevention comes often comes into play during the building phase, while there’s ample opportunity to come up with strategies and measures. When mold is able to gain a foothold in the construction phase, it is sometimes harder to kill later on. If this goes on too long people might get sick from mold they don’t even know is present. Mold can make not only you and your family sick, but also your pets. And it causes damage to the integrity of a structure, eating away at walls, floors and even the foundations of the building. If you want to protect your family and home, stop mold before it can start. It doesn’t matter if the building is a home, officer or hospital, either; they can all benefit. Mold is happy to grow in any structure where it is able to find a secluded place. Mold Solutions NW uses a product called Microbe Guard for prevention efforts. This product can adhere to most surfaces to create a new layer on top that is free of mold infestation. Plus, attacking microbes will not be able to grow on this surface. After using Microbe Guard, that surface will become inhospitable to mold particles seeking a new place to grow. We are proud of our approach to preventing future mold growth in Kent. As one piece of our overall approach, it may occur before, after or even during the remediation. When to apply preventative techniques comes down to the particular needs in your home or building. Even a building that already has a mold problem will benefit from prevention. There is no bad time to consider employing prevention methods, whether the building is under construction or very old. A well-loved and lived in house that has never had a problem may still need mold prevention. A current mold problem can concern your attention, but having a mind for prevention as well could leave you with a lasting sense of security. Our remediation process includes prevention of future growth for these reasons. No matter why we are conducting a remediation in the first place, we want to stop mold from coming back to infest a home or building a second time. At Mold Solutions NW, we think of prevention as one piece of the puzzle, along with in-depth inspections and total remediation services. We focus on safety as well as precision to offer a permanent treatment to block invasive mold that can ruin your home and even cause illness.

Call 425-888-3332 to Schedule an Appointment

Discovering the Mold Problem in Kent

Mold can hide for years. We therefore conduct in-depth inspections during any remediation of a building with issues. Mold can’t escape the careful eyes of our inspectors, who know how to search any home, office or other building for telltale signs. The goal is to get rid of the mold before it can cause damage or get anyone sick. That’s why our inspections are hyper focused on the nitty gritty. As fellow residents of the Pacific Northwest, we understand the challenges that are particular to this area. Many people are anxious to remove mold after they spot it because it is a health hazard. However, there are many other reasons just as important for killing mold in your home. Mold also has the ability to sicken pets and weaken the core structures of a building that keep it sturdy. The foundation of the building could be dangerously compromised by mold that damages it as it grows undetected. Mold can eat away at many surfaces, including walls, ceilings, floors or the very foundations of the structure. Obviously, this is a dangerous situation that calls for swift remediation. The climate in Kent and the surrounding region can promote mold growth that is harmful to building integrity. Mold Solutions NW offers expert inspectors who know exactly what to look for and won’t miss a trace of mold. That is why inspection is a key aspect of mold solution services, helping to find mold and damage before the situation can deteriorate. Kent washington 98031 mold inspections

Our Mold Remediation Strategy for Kent Residents

Don’t let mold grow unchecked. Remediation is more than a quick fix to clean out mold growth, it is also a means of prevention. Our mold solutions services in Kent understand the particular needs of this area and offer in-depth fixes. We have therefore made inspection, prevention and remediation the foundations of our strategy.

Call 425-888-3332 to Schedule an Appointment

Guided by this three-pronged approach, we believe our services can address any mold problems in Kent. Our environmentally friendly products are affordable for anyone trying to protect themselves from mold damage and related problems. We pride ourselves on our years of expertise and outstanding safety record.
mold remediation

Have a Mold Problem? We Are Here to Help!

Fill out the form below and we will contact you within 24 hours.

  • This field is for validation purposes and should be left unchanged.